Trigger And Number Of Devices - Mitsubishi Electric F930GOT-BWD-E User Manual

Graphic Operation Terminal F930GOT
13.6.5

Trigger and number of devices

The table below shows the number of registration points available in the observe status function.
• Triggers can be registered for each project or screen (No. 1 to 500).
Maximum number of registered triggers
* When screens are overlapped or a screen is called, triggers registered on the base screen
are valid.
• The table below shows the number of storing devices for one trigger.
Word devices
• Many triggers and storing devices can be registered as shown above. However, the regis-
tered contents and the number of registered points give effect on the responsibility of the
F930GOT. Confirm the cautions described in the next paragraph.
For projects
40 points
For screens
40 points
Bit devices
16-bit
32-bit
Additional Functions (in V.2.00 or later) 13
80 points in total
For "Momentary", "Set", "Reset" and "Alternate"
1 to 40 points in total
For "Signed" and "Unsigned"
1 to 20 points in total
For "Signed" and "Unsigned"
1 to 10 points in total
13-20