Set-Up Mode - Mitsubishi Electric F930GOT-BWD-E User Manual

Graphic Operation Terminal F930GOT
6.6

SET-UP MODE

Set the operation environment required to operate the GOT such as the system language and
the connected PLC.
For the detailed setting contents, refer to "2. Start up".
u u u u Basic operation
The OTHER MODE
screen is displayed.
Paragraph 6.1
[SET-UP MODE]
[SET-UP MODE]
LANGUAGE
1)
PLC TYPE
2)
SERIAL PORT (RS232C)
3)
OPENNING SCREEN
4)
MAIN MENU CALL KEY
5)
SET CLOCK
6)
SET BACKLIGHT
7)
BUZZER
8)
LCD CONTRAST
9)
CLEAR USER DATA
10)
SET UP MODE
Select "SET UP MODE"
on the screen.
Areas enclosed with broken lines indicate touch
Screen 1
keys. (Broken lines are not actually displayed on
END
11)
the screen.)
12)
1) LANGUAGE
Allows to set the language such as Japanese
12)
and English used on the system screens.
2) PLC TYPE
Allows to set the connected PLC type.
3) SERIAL PORT
To be set when a printer is connected to the
GOT or when communication is performed
with a micro computer board.
4) OPENING SCREEN
Allows to set the duration in which the open-
ing screen is displayed immediately after the
power of the GOT is turned on.
5) MAIN MENU CALL KEY
Allows to set the positions of the touch key
which calls the SELECT MODE screen in the
screen mode (on which user screens are dis-
played).
6) SET CLOCK
Allows to set the time used as the reference
for the time switch and the time display.
7) SET BACKLIGHT
Allows to set the time at which the backlight
turns off after a continued idle period.
8) BUZZER
Allows to set whether or not a buzzer sound is
issued when a key is pressed.
9) LCD CONTRAST
Allows to set the LCD contrast.
10)CLEAR USER DATA
Deletes the entire user screen data.
11)END
Terminates the operation environment setting.
12)Cursors
Changes over selection of the menu item.
The SET UP MODE
screen is displayed.
The screen shown below
is displayed.
Other Mode 6
6-6