Write To Plc - Mitsubishi Electric F930GOT-BWD-E User Manual

Graphic Operation Terminal F930GOT
13.2.4

Write to PLC

Set word devices in the PLC to which ASCII codes of the bar code reader are written from the
GOT.
Set the word devices using the screen creation software.
- SWoD5C-GOTRE-PACK
Set word devices in "Bar Code Reader" in "Common Setting".
- FX-PCS-DU/WIN-E
Set word devices in "Bar Code Setting" in "System Setting" in "View".
• Specification of word devices
D, T, C, GD
D, W, TN, CN, R, Z, V, GD
* When the FX Series PLC is connected, C200 to C255 are not available.
• Number of devices (number of specified words)
One word stores two characters of the ASCC code data sent from the bar code reader.
Two to 32 word devices can be specified.
• Example of storage
The ASCII code data from the bar code reader is stored in the word devices specified
above.
If the read data is smaller than the specified number of devices, space (20H) is stored in
unused word devices.
Example: Data read from bar code reader: 1234567
Write destination device
D100
D101
D102
D103
D104
D105
On the contrary, if the read data is larger than the specified number of devices, the exces-
sive data is not stored.
: FX Series
: A Series
Head device of write destination : D100
Number of devices: 6
Stored data
7
H3231
H3433
H3635
H2037
H2020
Additional Functions (in V.2.00 or later) 13
When connecting a PLC manufactured by
another company, specify word devices suit-
able to the connected PLC.
ASCII code
21
43
65
7
Space (20H) is stored after "7".
13-4