Mitsubishi Electric F930GOT-BWD-E User Manual page 205

Graphic Operation Terminal F930GOT
2) Shift
• When the number of digits of a numeric to be displayed is smaller than the specified total
number of digits, the numeric is automatically shifted to the right, the center or the left in
accordance with the setting.
Example: When the specified total number of digits is set to 9 and the displayed numeric
is a 3-digit value
Right :
Center :
Left :
3) Gain 1, gain 2 and offset
The value obtained by the calculation "(Monitor value x Gain 1 / Gain 2) + Offset" is dis-
played.
Example: When the monitor value is 1000 (current value of D100), the gain 1 is set to 10,
the gain 2 is set to 2 and the offset is set to 3
(1000 × 10 ÷ 2) + 3 = "5003" is displayed.
u u u u Display example
"Text" object
n n n n Important point
• Display of numerics for timers and counters
When a device whose numeric is to be displayed is set to a timer or counter, its current
value is displayed.
To display the set value of a timer/counter, specify indirectly the set value of a timer/counter
to be displayed as shown below, then display the value of the specified data register.
Start point
1 2 3
1 2 3
HEATING TIME
LINE 1
LINE 2
When T0 is specified as a device whose
T0
numeric is to be displayed, the current value
D10
of T0 is displayed.
When D10 is specified as a device whose
numeric is to be displayed, the set value of
T0 is displayed.
Creation of Display Screen (SWo o o o D5C-GOTRE-PACK) 11
1 2 3
89.6 s
126.3 s
"Number" object
11-5