Screen Call Function And Overlay Function - Mitsubishi Electric F930GOT-BWD-E User Manual

Graphic Operation Terminal F930GOT
8.5

Screen call function and overlay function

In the F930GOT, user screens can be overlaid.
The screen call function which allows to specify the screens to be overlaid using the screen
creation software and the overlay function which allows to specify the screens to be overlaid
from the PLC are available.
1) Screen call function (For the details, refer to Paragraph 8.5.1.)
Screens to be overlaid can be specified preliminarily using the screen creation software.
The base screen and up to five other screens can be overlaid at a time.
2) Overlay function (For the details, refer to Paragraph 8.5.2.)
When screens to be overlaid are specified from the PLC (Refer to Sections 10 and 12.), the
base screen and up to two other screens can be overlaid at a time.
When this overlay function is used together with the screen call function, the screen
call function is effective only for the base screen. The screen call function is not
effective for the second and third screens to be overlaid.
(If the screen call function is used for the second and third screens, the base screen
selected in the screen call function is overlaid by the overlay function.)
• In each of the screen call function and the overlay function, when other functions such as
touch keys and numeric change are displayed, such other functions are effective on all of
the overlaid screens. If such other functions are displayed in a same position, a function on
the top screen is effective.
Base screen
Touch key
The base screen is located at the bottom.
If touch keys are displayed in a same position, the touch key on the overlaying screen
2 located at the top is
effective.
Overlaying screen 1
+
Touch key
Creation of Display Screens 8
Overlaying screen 2
+
Touch key
8-14