Mitsubishi Electric F930GOT-BWD-E User Manual page 96

Graphic Operation Terminal F930GOT
• The table below shows the settings specific to the screen creation software for GOT-A900
among the common items. These settings are not available in the F930GOT. (These set-
tings are not supported by the screen creation software for DU, either.)
Display frame
Arithmetic operation
Display trigger
Range specification
Security
Multi-device monitor
The display frame can be selected among only images built in the system
software. (On the other hand, in the A900GOT Series, arbitrary images can
be selected.)
The arithmetic operation function is not supported except some objects.
In Numerical Display and Numerical Input, arithmetic operation can be per-
formed only while the gains and the offset are specified (that is, while the
arithmetic operation formula is fixed).
Only "Always" is available as the display trigger except in some objects.
In line graphs, the display trigger is used to specify the sampling cycle.
The color and the blink attribute cannot be changed over by a value of a
word device. Only the range in the normal status can be specified.
The security in the unit of screen is available, but the security in the unit of
object is not supported. The available number of security levels is 15 in the
same way as the A900GOT.
In objects (such as Line Graph) monitoring two or more devices, only con-
secutive devices can be assigned. Random assignment is not available.
Creation of Display Screens 8
8-6