Print Out - Mitsubishi Electric F930GOT-BWD-E User Manual

Graphic Operation Terminal F930GOT
6.4

PRINT OUT

The alarm history can be printed.
Because the communication setting can be performed in accordance with each printer, diversi-
fied printers equipped with RS-232C interface can be used.
The communication setting for the printer can be performed in "SET-UP MODE" in the GOT or
using the screen creation software.
Connect a printer.
Perform the printout
operation in the GOT.
Select the printout data
and execute printout
(procedure shown below).
u u u u Basic operation
Printer output
setting
The screen
shown below is
displayed.
[PRINT PUT]
[PRINT PUT]
ALARM HISTORY
• Connect a printer to the GOT, and power them up.
• Manipulate the GOT, and select "PRINT OUT" on the
OTHER MODE screen.
• Select the data to be printed out.
The alarm history can be printed.
ALARM HISTORY
Select "ALARM
HISTORY" on the
screen.
Screen
END
NO
When canceling the
printout
The screen shown on the
left is displayed again.
YES
When starting
the printout
Other Mode 6
The PRINT OUT
screen is displayed.
6-4