Connection Of Flex-Pc N Series - Mitsubishi Electric F930GOT-BWD-E User Manual

Graphic Operation Terminal F930GOT
1.11

Connection of FLEX-PC N Series

The GOT can be connected to the FLEX-PC N Series manufactured by FUJI ELECTRIC via a
following link unit.
• Connection type
• Applicable PLC and link unit
< FLEX-PC N Series >
A link unit (general-purpose RS-232C/RS-485 interface module) is required to be attached.
Or a CPU with built-in RS-232C interface is required.
• System configuration
RS422
• Link unit
- NB Series
NB-RS1-AC
NB-RS1-DC
- NJ Series
NJ-RS2
NJ-RS4
- NS Series
NS-RS1
- CPU with built-in RS-232C interface
NJ-CPU-B16
:LINK PORT (RS-422)
:LINK PORT (RS-232C)
:CPU PORT (RS-232C)
RS232C
To link unit or
built-in
RS-232C
interface
Select either one by the environment set-
ting or the software to create screens.
Introduction 1
1-23