Line Graph - Mitsubishi Electric F930GOT-BWD-E User Manual

Graphic Operation Terminal F930GOT
11.4.2

Line graph

The "Line" object acquires the current values of up to four 16-bit data registers in the PLC at a
specified time interval, and displays the acquired data in the form of line graph.
u u u u Contents of setting
Display direction
Number of lines
Number of points : 1 to 50
Monitored devices : 16-bit or 32-bit word devices (D, T, C or GD)
Line type
Color
Display condition : Constant cycle (which can be set arbitrarily in the unit of 100 ms)
u u u u Display example
"Trend Graph (Sample)" object
Word Device
Display condition
Ticks Horizontal
Ticks Vertical
Minimum Value
Maximum Value
Shown Device: No. 1
Device: No. 2
Device: No. 3
Device: No. 4
Scale Color:Black
• Word devices D100 and D101 are acquired at every 3 seconds, and displayed in the form of
line graph.
• If the acquired data is smaller than the minimum value (0) or larger than the maximum value
(1000), it is not displayed in the graph and the graph is discontinued.
n n n n Important point
Sampling time
It is recommended to set the sapling time to 1 second or more.
: Right or left
: 1 to 4
,
:
: Graph color, frame color, scale color
6
D100
5
30
10
4
7
0
3
1000
Continuous Red
2
Dotted Blue
None
1
None
0
Creation of Display Screen (SWo o o o D5C-GOTRE-PACK) 11
, ,
No. 3 (D102)
1 2 3 4
,
When the acquired data is smaller
than the minimum value
(or larger than the maximum value)
No.1 (D100)
5 6 7 8
11-20
9