Mitsubishi Electric F930GOT-BWD-E User Manual page 113

Graphic Operation Terminal F930GOT
Screen No. 1
DRIVE PREPARATION
1. PLEASE SELECT LINE 1
OR LINE 2
START
PLC: X0 = ON
START key: ON
Screen No. 2
LINE 1
No overlay a)
Overlay of three screens: The screens Nos. 10 and 20 overlay the screen No. 1.
In this overlay example, the line 1 (screen No. 2) is adopted.
Screen No. 10
PLEASE REPLENISH THE
MATERIAL
Screen No. 20
BOLT
M3 × 30
Overlay of two screens: The screen No. 11 overlays the screen No. 2.
Screen No. 11
MATERIAL REPLENISHMENT
COMPLETION
Screen currently being displayed
Set the screen preliminarily so that the screen No. 2 is displayed
when the START touch key is pressed.
Touch key
DRIVING
MENU
PLC: X1 = ON
START key: ON
Screen No. 3
LINE 2 DRIVING
MENU
Creation of Display Screens 8
Set the MENU (START) touch key
so that the screen No. 1 is displayed
when the MENU (START)
touch key is pressed.
Touch key
b)
Display screen realized by overlay
No. 2 + No. 10 + No. 20
LINE 1 DRIVING
PLEASE REPLENISH THE
MATERIAL
BOLT
M3 × 30
Display screen realized by overlay
No. 1 + No. 11
LINE 1 DRIVING
MATERIAL REPLENISHMENT
COMPLETION
8-23