Changing Of Set Values And Current Values Of T, C And D - Mitsubishi Electric F930GOT-BWD-E User Manual

Graphic Operation Terminal F930GOT
4.2.2

Changing of set values and current values of T, C and D

Set values and current values of word devices (T, C, D, V and Z) in the PLC can be changed.
u u u u Basic operation
T/C/D monitor
display
Read the values
using the procedure
described in the
previous paragraph.
*1 When the SET key is pressed, the numeric input keyboard is displayed.
Numeric (decimal) input keyboard
6
2
0
n n n n Important point
1) Changing of set values of T and C and file registers
They can be changed when a RAM is used as the memory in the PLC.
They cannot be changed when an EPROM or EEPROM cassette is used.
,
Move the cursor
to a device to
be changed.
The entered numeric is displayed.
CLR
7 8 9
3 4 5
1 - ENT
SET
Change the Change the
current value set value of
of D, T and C. T and C.
*1
- 0 to 9
Enter the Enter a
minus (-) numeric.
sign.
4-4
HPP Mode 4
ENT
Execute
change.