Forced On/Off - Mitsubishi Electric F930GOT-BWD-E User Manual

Graphic Operation Terminal F930GOT
4.2.3

Forced ON/OFF

Bit devices (Y, M and S) and word devices (T and C) can be forcedly set to ON/OFF.
When T, C, D, V or Z is forcedly set to OFF, its current value is reset to "0".
u u u u Basic operation
Y/M/S/T/C/D/V/Z
monitor display
Paragraph 4.1
u u u u Operation example
Forced ON/OFF of output Y0 and auxiliary relay M0
Display Y0/M0
monitor using the
procedure described
in Paragraph 4.2.1.
Screen 1
[DEVICE MONITOR]
Y000
DEV. SET
,
Move the cursor to a
device to be forcedly
set to ON/OFF.
ON
ON
Display the
ON screen 1.
END
M 0
ON OFF
ON
ON
OFF
OFF
ON
Move the ON
cursor to Display the
M0. ON screen 2.
Screen 2
[DEVICE MONITOR]
Y000
DEV. SET ON
OFF
Move the Move the
OFF
cursor to cursor to
Y0. M0.
END
M 0
OFF
HPP Mode 4
OFF
OFF
4-6