Mitsubishi Electric F930GOT-BWD-E User Manual page 161

Graphic Operation Terminal F930GOT
9.5.1 Touch Key
A specified area on the screen can be set as a touch key which functions as an operation key
when pressed.
The "Touch Key" object allows to specify an area which functions as a touch key. To each touch
key, functions offered by the objects "Switch", "Send Data Bank", "Write Constant", "Incre-
ment", "Decrement", "Data Setting" or "Change Screen" can be assigned.
u u u u Contents of setting
Attribute
Position
Size
Reverse On
Touch
Trigger
Key Code
Auto repeat and
Simul. press
Label
Label Color
Key Type
Frame Color
1) Size
Enter the X and Y coordinates in the unit of dot.
Enter the width (W) and the height (H) in the unit of dot.
Set whether or not the touch key frame is changed over when pressed
(None/Key/Bit).
When "Bit" is selected, specify a bit device for changeover.
Enter a bit device which makes the touch key effective.
Enter a 16-bit hexadecimal value.
It is used as a code when a character is entered or when a special operation
is performed.
Set the operation.
Enter a text to be displayed inside the touch key. The character size can be
specified.
Enter the label color. (Initial value: Black)
Select the touch key frame shape.
Enter the display color and the background color. (Initial values: Black and
white)
For the background color, enter the color in the ON status and the color in
the OFF status respectively.
Touch key
15 meshes (240 dots)
Creation of Display Screens (FX-PCS-DU/WIN-E) 9
Contents of setting
• The entire screen is divided into
"meshes" as shown on the left. The
touch key area can be specified in the
unit of mesh.
• The entire screen consists of 15 W x 4
H meshes. One mesh consists of 16 x
20 dots.
• Broken lines are not actually displayed
on the screen.
9-41