Text Library - Mitsubishi Electric F930GOT-BWD-E User Manual

Graphic Operation Terminal F930GOT
9.6

Text library

The text library stores texts to be displayed by the "Library Text" and "Text Indicator" objects.
The text library data is stored in the flush memory.
• Texts stored in the library can be created using the screen creation software. The figure
below shows the Text Library screen.
a) No.
The Nos. and character strings already registered are displayed in the list.
a) No.
A registration No. assigned to each registered text is used to display the "Library Text"
and "Text Indicator" objects in the F930GOT.
Up to 2,000 texts (Nos. 0 to 1999) can be registered in the library.
b) Text
Enter a text to be registered in the library.
Up to 10 full-width characters (Kanji of JIS level 1, Katakana, Hiragana, alphabets,
numerics and symbols) and 20 half-width characters (Katakana, alphabets, numerics
and symbols) can be entered to each text.
n n n n Important point
In the "Library Text" and "Text Indicator" objects, "W (width)" and "H (height)" of the character
size can be set to × 1 to × 4 respectively.
When "H" is set to "× 0.5" for alphabets, numerics or Katakana characters, characters are dis-
played in the size whose height is a half of the half-width size. At this time, make sure to enter
half-width characters to a text to be registered in the text library. If a text consisting of full-width
characters is registered in the text library and displayed in the size "W: × 0.5, H: × 0.5" on the
screen, it cannot be displayed correctly.
Creation of Display Screens (FX-PCS-DU/WIN-E) 9
b) Text
9-59