Transfer Of Screen Data - Mitsubishi Electric F930GOT-BWD-E User Manual

Graphic Operation Terminal F930GOT
8.2

Transfer of screen data

Pay rigid attention to the cautions below when the screen data created using the screen cre-
ation software for DU is read/written using the screen creation software for GOT-A900 or when
the screen data created using the screen creation software for GOT-A900 is read/written using
the screen creation software for DU.
If unavailable setting is contained in the screen data, an alarm message is displayed when the
screen data is read. In such a case, check the contents of the read screen data.
Screen creation
software for DU
1) Screen data
• Read/write of the functions dedicated to the screen creation software for DU (Refer to Para-
graph 8.1.1.)
a) Software for DU:
No problems are expected in both read and write.
b) Software for GOT-A900:
If the F930GOT has dedicated functions, such functions are not read.
• Setting of display screen changeover (Refer to Paragraph 8.1.2.)
c) Software for DU:
Names and contents of the functions are automatically converted into those used in the
software.
d) Software for GOT-A900:
Names and contents of the functions are automatically converted into those used in the
software.
• Functions dedicated to the screen creation software for GOT-A900 (Refer to Paragraph
8.1.3.)
e) Software for DU:
These functions cannot be set in the F930GOT. (That is, these functions cannot be read
nor written.)
f) Software for GOT-A900:
These functions cannot be set in the F930GOT. (That is, these functions cannot be read
or written.)
a)
F930GOT
b)
Screen creation
software for GOT-A900
Creation of Display Screens 8
8-8