Mitsubishi Electric F930GOT-BWD-E User Manual page 226

Graphic Operation Terminal F930GOT
3) Text
Enter a text to be displayed inside the touch key.
Up to 20 full-width characters or 40 half-width characters can be displayed.
<Display example:>
-In the case of 1 line
abc
ƒA•[ƒ•
When a text is
located in the center
If a text is longer than the touch key, the text is extruded.
abcdABCD1234
ƒA•[ƒ•
When a text is displayed in 1 line
4) Operation setting
Bit device
Word device: When the touch key is pressed, the current value of a specified word device
Base screen: When the touch key is pressed, the display screen is changed over.
5) Simultaneous press
Set whether or not the touch key is effective when it is pressed simultaneously together with
another touch key.
Only two keys can be made effective when pressed simultaneously.
Three or more keys cannot be made effective when pressed simultaneously.
6) Trigger
Always : The touch key always offers the assigned functions.
ON : While a specified bit device is ON, the touch key offers the assigned functions.
OFF : While a specified bit device is OFF, the touch key offers the assigned functions.
-In the case of 2 lines
abc
ƒA•[ƒ•
ABC
•ã•¸
When the first and
third lines are blank
and a text is
displayed in the
second line
: When the touch key is pressed, a specified bit device is turned on or off.
(Paragraph 11.5.2)
can be changed. (Paragraph 11.5.3)
(Section 12)
Creation of Display Screen (SWo o o o D5C-GOTRE-PACK) 11
-In the case of 3 lines
abc
ƒA•[ƒ•
ƒA•[ƒ•
ABC
ABC
•ã•¸
•ã•¸
123
abc
ƒA•[ƒ•
•ã•¸
123
When the second line is
blank and texts are
displayed in the first and
third lines respectively
11-26