Data Display Function; Display Of Numerics - Mitsubishi Electric F930GOT-BWD-E User Manual

Graphic Operation Terminal F930GOT
11.3

Data display function

The ON/OFF status of bit devices in the PLC and the current value of word devices in the PLC
can be displayed.
11.3.1

Display of numerics

The "Numerical Display" object displays the data of word devices in the PLC in the form of
numeric.
u u u u Contents of setting
1) Number of digits
• Maximum allowable number of digits: 12 (Each of a minus sign (-) and a decimal point is
counted as 1 digit.)
High-speed counter
-2147483648
11 digits
Number of digits after decimal point
• Enter the number of digits after a decimal point for a case where a decimal point is dis-
played.
Example: When the displayed numeric is "2000"
2000: Number of digits after decimal point = 0
200.0: Number of digits after decimal point = 1
20.00: Number of digits after decimal point = 2
2.000: Number of digits after decimal point = 3
1) Style
• Select one style for decimal with sign, decimal without sign, hexadecimal, octal, binary
and real.
• Zero suppression
When the zero suppression function is not used, "0" is displayed in each blank digit posi-
tion to the left of the data. The number of "0" is displayed will depend on the specified
total number of digits.
Example:
When the total number of digits is set to 7 and the number of digits after decimal point is
set to 2
00012.34:"0" is displayed in these digits.
• A numeric is displayed horizontally.
Creation of Display Screen (SWo o o o D5C-GOTRE-PACK) 11
If data whose number of digits exceeds the maximum allowable
C235 (32 bits)
number of digits is specified to be displayed, "?" is displayed.
to
-2147483648
10 digits
11-4