Function List - Mitsubishi Electric F930GOT-BWD-E User Manual

Graphic Operation Terminal F930GOT
1.2

Function list

The functions described in the previous page are divided into four modes shown in table below.
The operator can use each function by selecting a corresponding mode.
Table 1.1:
Mode Function
Screen User screen
mode display
Outline of function
Character display
• Characters such as alphabets, numbers, Kata-
kana, Kanji and external characters are dis-
played.
• Japanese and English are displayed.
Graphic display
• Graphics such as straight lines, circles and rect-
angles are displayed.
Monitor function
• Set values and current values of word devices (T,
C, D, V and Z) in the PLC can be displayed in the
form of numeric, bar graph, trend graph and
panel meter.
• The color of specified area on the screen is
inverted (between white and blue) in accordance
with the ON/OFF status of bit devices (X, Y, M, S,
T and C) in the PLC.
Data change function
• Set values and current values of word devices (T,
C, D, V and Z) in the PLC can be changed in the
form of numeric, bar graph, trend graph and
panel meter.
Switch function
• The ON/OFF status of bit devices (X, Y, M, S, T
and C) in the PLC can be controlled in the form
of momentary, alternate and set/reset.
Screen changeover
• The display screen can be changed over from
the PLC or a touch key.
Recipe function (data file transfer)
• Data saved in the GOT can be transferred to the
PLC.
Security function (screen protection function)
• Only screens whose entry code level is equiva-
lent to or lower than the entry code entered by
the operator are displayed. (This function is
available also in the system screens.)
Alarm function
• The ON/OFF status of specified bit devices are
monitored, and the number of times of occur-
rence and the occurrence time of alarms are dis-
played. Such alarm data can be saved as alarm
history.
Introduction 1
Reference
Remarks
sections
3, 8, 9, 11 Note 1
3, 8, 9, 11
3, 8, 9, 11
3, 8, 9, 11
3, 8, 9, 11
3, 10, 12
3, 9, 11
2
7, 11
1-3