Section 20
IED hardware
20.4.4
20.4.4.1
876
IEC06000135 V3 EN-US
Figure 422:
How to reach the connectors on the rear side of the IED.
PosNo
1
2
3
Side-by-side 19" rack mounting
Overview
IED case size 1/2 x 19" and RHGS cases can be mounted side-by-side up to a
maximum size of 19". For side-by-side rack mounting, the side-by-side mounting
kit together with the 19" rack panel mounting kit must be used. The mounting kit
has to be ordered separately.
Use only the screws included in the mounting kit when mounting
the plates and the angles on the IED. Screws with wrong dimension
may damage the PCBs inside the IED.
1
80 mm
Description
Screw
Screw
Rear protection cover
Line distance protection REL650 2.2 IEC
1MRK 506 382-UEN A
3
IEC06000135-2-en.vsd
Type
M4x10
M5x8
(Ordered separately)
IP10323-1 v1
M11974-3 v3
Technical manual
2