ABB REL650 Technical Manual page 795

1MRK 506 382-UEN A
Line distance protection REL650 2.2 IEC
Technical manual
Name of signal Description Displayed on
IEC61850ERROR IEC
61850
Error
status
DNP3 DNP3
error
status
LMDERROR LON/Mip
Device
Error
status
APPERROR Runtime
Applicatio
n Error
status
SETCHGD Settings
changed
SETGRPCHGD Setting
groups
changed
Table 587: Self-supervision's hardware dependent internal signals
Card Name of signal
PSM PSM-Error
BIM BIM-Error
BOM BOM-Error
IOM IOM-Error
SOM SOM-Error
NUM NUM-Error
Table continues on next page
Reasons for activation
local HMI as
IEC61850 This signal will be active if the IEC 61850 stack
did not succeed in some actions like reading
IEC 61850 configuration, startup, for example
DNP3 This signal will be active when DNP3 detects
any configuration error during startup.
SLM301 LON network interface, MIP/DPS, is in an
unrecoverable error state.
Runtime This signal will be active if one or more of the
App Error application threads are not in the state that
Runtime Engine expects. The states can be
CREATED, INITIALIZED, RUNNING, for
example
Settings This signal will generate an Internal Event to the
changed Internal Event list if any settings are changed.
Settings This signal will generate an Internal Event to the
changed Internal Event list if any setting groups are
changed.
Description Displayed on Reasons for activation
local HMI as
Power PSM1 Activated if the module has a hardware
Supply error.
Module
Error
status
Binary In BIMn Activated if the module has a hardware
Module error.
Error n = slot number
status
Binary BOMn Activated if the module has a hardware
Out error.
Module n = slot number
Error
status
In/Out IOMn Activated if the module has a hardware
Module error.
Error n = slot number
status
Static Out SOMn Activated if the module has a hardware
Module error.
Error n = slot number
status
Numerical NUM30 Activated if the module has a hardware
/CPU or software error.
Module
Error
status
Section 18
Security
789