ABB REL650 Technical Manual page 400

Section 11
Control
394
Name Type
XPOSL1 GROUP
SIGNAL
XPOSL2 GROUP
SIGNAL
XPOSL3 GROUP
SIGNAL
Table 221: SCSWI Output signals
Name Type
SELECTED BOOLEAN
RES_RQ BOOLEAN
START_SY BOOLEAN
CANC_SY BOOLEAN
POSITION INTEGER
OPENPOS BOOLEAN
CLOSEPOS BOOLEAN
POLEDISC BOOLEAN
CMD_BLK BOOLEAN
L_CAUSE INTEGER
POS_INTR BOOLEAN
XEXINF GROUP SIGNAL
AU_OPEN and AU_CLOSE are used to issue automated
commands as e.g. for load shedding for opening respectively
closing to the SCSWI function. They work without regard to how
the operator place selector, PSTO, is set. In order to have effect on
the outputs EXE_OP and EXE_CL, the corresponding enable input,
EN_OPEN respectively EN_CLOSE must be set, and that no
interlocking is active.
L_SEL, L_OPEN and L_CLOSE are used for local command
sequence connected to binary inputs. In order to have effect, the
operator place selector, PSTO, must be set to local or to remote
with no priority. If the control model used is Select before operate,
Also the corresponding enable input must be set, and no
interlocking is active. The L_SEL input must be set before
Default Description
- Group signal from XCBR/XSWI per phase
- Group signal from XCBR/XSWI per phase
- Group signal from XCBR/XSWI per phase
Description
Select conditions are fulfilled
Request signal to the reservation function
Starts the external synchronizing function
Cancels the external synchronizing function,
started through START_SY
Position indication
Open position indication
Closed position indication
The positions for poles L1-L3 are not equal after
a set time
Commands are blocked
Latest value of the error indication during
command
Stopped in intermediate position
Execution information to XCBR, XSWI &
XLNPROXY
Line distance protection REL650 2.2 IEC
1MRK 506 382-UEN A
PID-6798-OUTPUTSIGNALS v3
GUID-7DABB496-EABE-48A4-8078-7ED5D6D4FE14 v2
Technical manual