Rack Mounting Protection Relay - ABB RELION 615 series Installation Manual

Section 4
Mounting
4.3.5
28
B
C
D E
1 2
A071314 V4 EN
Figure 15: Protection relay semi-flush mounted inclined
A 25 ° 1 M4 screws
B 8.70 inches (221 mm) 2 Gasket
C 0.35 inches (9 mm) 3 Angled frame
D 4.21 inches (107 mm) 4 Case
E 5.24 inches (133 mm) 5 Plug-in unit
F 9.06 inches (230 mm)
G 7.48 inches (190 mm)

Rack mounting protection relay

A mounting kit is needed for rack mounting the protection relay. In addition to the detailed
mounting instructions, the 19" rack mounting kit includes:
• Mounting panel; the type of the mounting panel depends on the number of mounted
devices
• Screws
1. Mount the mounting panel to a 19" rack.
2. Loosen the four M5 fixing screws in the case to fit the case into the panel cut-out.
3. Mount the case to the panel cut-out.
A
F
3 4 5
1MAC051065-MB K
G
615 series ANSI
Installation Manual