Settings - ABB REL650 Technical Manual

Section 19
Basic IED functions
19.8.4
822
Name Type
G1AI3 GROUP SIGNAL
G1AI4 GROUP SIGNAL
G1N GROUP SIGNAL
Table 614: SMAI2 Input signals
Name Type
BLOCK BOOLEAN
REVROT BOOLEAN
GRP2L1 STRING
GRP2L2 STRING
GRP2L3 STRING
GRP2N STRING
Table 615: SMAI2 Output signals
Name Type
G2AI3P GROUP SIGNAL
G2AI1 GROUP SIGNAL
G2AI2 GROUP SIGNAL
G2AI3 GROUP SIGNAL
G2AI4 GROUP SIGNAL
G2N GROUP SIGNAL

Settings

Settings DFTRefExtOut and DFTReference shall be set to default
value InternalDFTRef if no VT inputs are available. Internal
nominal frequency DFT reference is then the reference.
Description
Group 1 analog input 3
Group 1 analog input 4
Group parameter for residual sample
Default Description
0 Block group 2
0 Reverse rotation group 2
- First analog input used for phase L1 or L1-L2
quantity
- Second analog input used for phase L2 or L2-L3
quantity
- Third analog input used for phase L3 or L3-L1
quantity
- Fourth analog input used for residual or neutral
quantity
Description
Group 2 analog input 3-phase group
Group 2 analog input 1
Group 2 analog input 2
Group 2 analog input 3
Group 2 analog input 4
Group parameter for residual sample
Line distance protection REL650 2.2 IEC
1MRK 506 382-UEN A
PID-3406-INPUTSIGNALS v6
PID-3406-OUTPUTSIGNALS v5
SEMOD55783-1 v2
SEMOD130357-4 v3
Technical manual