ABB REL650 Technical Manual page 758

Section 17
Station communication
Name
GiNo6
GiNo7
GiNo8
17.8.10
17.8.10.1
17.8.10.2
17.8.10.3
752
Values (Range) Unit
Excluded -
Included
Excluded -
Included
Excluded -
Included
The FunctionType parameter associates a particular instance of the function block
with a FUN. Refer to the IEC 60870-5-103 standard for details.
The InfNon parameters are used to associate each individual input signal with a
userdefined INF. Refer to the IEC 60870-5-103 standard for details.
The TypNon parameters determine if messages use absolute or relative time. This
adheres to the TYPE IDENTIFICATION (TYP) message types 1 (time-tagged
message) and 2 (time-tagged message with relative time) of the IEC 60870-5-103
standard.
The GiNon parameters determine whether a message is sent as a part of a GI reply
or not. Refer to the IEC 60870-5-103 standard for details.
Function commands for IEC 60870-5-103 I103CMD
Functionality
I103CMD is a command function block in control direction with pre-defined
output signals. The signals are in steady state, not pulsed, and stored in the IED in
case of restart.
Identification
Function description
Function commands for IEC
60870-5-103
Function block
I103CMD
BLOCK
IEC10000282-1-en.vsd
IEC10000282 V1 EN-US
Figure 369: I103CMD function block
Step Default
- Included
- Included
- Included
Function block
name
I103CMD
16-AR
17-DIFF
18-PROT
1MRK 506 382-UEN A
Description
Response and status change (GI)
Response and status change (GI)
Response and status change (GI)
GUID-86DE9DBA-BE2F-4CC9-B447-1D2D86849EFF v2
GUID-973929FE-292B-42A5-ACF9-BC95E2B16AE1 v2
GUID-CFD43980-0791-40D1-9136-CF4CCC35549A v1
IEC 60617 ANSI/IEEE C37.2
identification device number
- -
GUID-C0680812-C488-4546-AA65-F590955DBF0C v1
Line distance protection REL650 2.2 IEC
Technical manual