Side-By-Side Rack Mounting - ABB REL670 Installation And Commissioning Manual

3.5
Mounting methods and details
View from above
PosNo Description
1 Screws
2 Fixing screws
Figure 12: How to reach the connectors on the rear side of the IED.
Procedure
1. Remove the inner screws (PosNo 1), upper and lower on one side.
2. Remove all three fixing screws (PosNo 2), on the opposite side, from
wall support.
3. The IED can now be swung out for access to the connectors, after
removing any rear protection.

Side-by-side rack mounting

IED case sizes, 1/2 or 3/4 of 19" and RHGS cases, can be mounted side-by-side up to a maxi-
mum size of 19".
1
80 mm
Chapter 5
Installing the IED
2
en04000455.vsd
25