Signals; Technical Data; Controllable Gate Function Block Gate; Function Block - ABB REL650 Technical Manual

1MRK 506 382-UEN A
13.7.1.2
13.7.1.3
13.7.2
13.7.2.1
13.7.2.2
Line distance protection REL650 2.2 IEC
Technical manual

Signals

Table 298: AND Input signals
Name Type
INPUT1 BOOLEAN
INPUT2 BOOLEAN
INPUT3 BOOLEAN
INPUT4 BOOLEAN
Table 299: AND Output signals
Name Type
OUT BOOLEAN
NOUT BOOLEAN

Technical data

Table 300: Number of AND instances
Logic block
3 ms
AND 60

Controllable gate function block GATE

The Controllable gate function block (GATE) is used for controlling if a signal
should be able to pass from the input to the output or not depending on a setting.

Function block

GATE
INPUT OUT
IEC04000410-2-en.vsd
IEC04000410 V2 EN-US
Figure 255: GATE function block
Signals
Table 301: GATE Input signals
Name Type
INPUT BOOLEAN
Default Description
1 Input signal 1
1 Input signal 2
1 Input signal 3
1 Input signal 4
Description
Output signal
Inverted output signal
Quantity with cycle time
8 ms
60
Default Description
0 Input to gate
Section 13
Logic
PID-3437-INPUTSIGNALS v7
PID-3437-OUTPUTSIGNALS v7
GUID-D1179280-1D99-4A66-91AC-B7343DBA9F23 v2
100 ms
160
IP11021-1 v2
M11489-3 v2
M11490-3 v2
PID-3801-INPUTSIGNALS v6
493