Switch Controller Scswi - ABB REL650 Technical Manual

Section 11
Control
11.4.6
392
LOCREM
CTRLOFF OFF
LOCCTRL LOCAL
REMCTRL REMOTE
LHMICTRL VALID
LOCREM
CTRLOFF OFF
LOCCTRL LOCAL
REMCTRL REMOTE
LHMICTRL VALID
IEC10000052 V2 EN-US
Figure 193: Configuration for the local/remote handling for a local HMI with two
bays and two screen pages
If the IED contains control functions for several bays, the local/remote position can
be different for the included bays. When the local HMI is used the position of the
local/remote switch can be different depending on which single line diagram screen
page that is presented on the local HMI. The function block Local remote control
(LOCREMCTRL) controls the presentation of the LEDs for the local/remote
position to applicable bay and screen page.
The switching of the local/remote switch requires at least system operator level.
The password will be requested at an attempt to operate if authority levels have
been defined in the IED. Otherwise the default authority level, SuperUser, can
handle the control without LogOn. The users and passwords are defined with the
IED Users tool in PCM600.

Switch controller SCSWI

QCBAY
LR_ OFF PSTO
LR_ LOC UPD_ BLKD
LR_ REM CMD_ BLKD
LOC
LR_ VALID
STA
BL_ UPD
REM
BL_ CMD
QCBAY
LR_ OFF PSTO
LR_ LOC UPD_ BLKD
LR_ REM CMD_ BLKD
LOC
LR_ VALID
STA
BL_ UPD
REM
BL_ CMD
LOCREMCTRL
PSTO1 HMICTR1
PSTO2 HMICTR2
PSTO3 HMICTR3
PSTO4 HMICTR4
PSTO5 HMICTR5
PSTO6 HMICTR6
PSTO7 HMICTR7
PSTO8 HMICTR8
PSTO9 HMICTR9
PSTO 10 HMICTR 10
PSTO 11 HMICTR 11
PSTO 12 HMICTR 12
IEC10000052-1-en.vsd
Line distance protection REL650 2.2 IEC
1MRK 506 382-UEN A
IP15603-1 v2
Technical manual