Section 19
Basic IED functions
19.5
19.5.1
19.5.2
19.5.3
816
Product information PRODINF
Functionality
Product information contains unchangeable data that uniquely identifies the IED.
Product information data is visible on the local HMI under Main menu/
Diagnostics/IED status/Product identifiers and under Main menu/
Diagnostics/IED Status/Identifiers:
•
ProductVer
•
ProductDef
•
FirmwareVer
•
SerialNo
•
OrderingNo
•
ProductionDate
•
IEDProdType
This information is very helpful when interacting with ABB product support (for
example during repair and maintenance).
Settings
The function does not have any parameters available in the local HMI or PCM600.
Factory defined settings
The factory defined settings are very useful for identifying a specific version and
very helpful in the case of maintenance, repair, interchanging IEDs between
different Substation Automation Systems and upgrading. The factory made settings
can not be changed by the customer. They can only be viewed. The settings are
found in the local HMI under Main menu/Diagnostics/IED status/Product
identifiers
The following identifiers are available:
•
IEDProdType
•
Describes the type of the IED. Example: REL650
•
ProductDef
•
Describes the release number from the production. Example: 2.1.0
•
FirmwareVer
•
Describes the firmware version.
•
The firmware version can be checked from Main menu/
Diagnostics/IED status/Product identifiers
•
Firmware version numbers run independently from the release
production numbers. For every release number there can be one or more
1MRK 506 382-UEN A
GUID-F67243CA-2429-4118-BBFF-3D62BF55E080 v2
GUID-D78786E6-C34A-4E63-9D1E-0582C8F1F7E1 v8
GUID-168CD792-8811-43B5-8760-74ED82DE17F7 v4
Line distance protection REL650 2.2 IEC
Technical manual
M11789-39 v10