Motorola DSP56309 User Manual page 372

D.1 INTRODUCTION
This section has been compiled as a reference for programmers. It contains a table
showing the addresses of all the DSPÕs memory-mapped peripherals, an exception
priority table, and programming sheets for the major programmable registers on the
DSP. The programming sheets are grouped in the following order: central processor,
Phase-Locked Loop (PLL), Host Interface (HI08), Enhanced Synchronous Serial Interface
(ESSI), Serial Communication Interface (SCI), Timer, and GPIO. Each sheet provides
room to write in the value of each bit and the hexadecimal value for each register. The
programmer can photocopy these sheets and reuse them for each application
development project. For details about the instruction set of the DSP56300 family chips,
see the DSP56300 Family Manual.
D.1.1 Peripheral Addresses
Table D-1 lists the memory addresses of all on-chip peripherals.
D.1.2 Interrupt Addresses
Table D-2 on page -11 lists the interrupt starting addresses and sources.
D.1.3 Interrupt Priorities
Table D-3 on page -13 lists the priorities of specific interrupts within interrupt priority
levels.
D.1.4 Programming Sheets
The remaining figures show the major programmable registers on the DSP56309.
MOTOROLA
PERIPHERAL ADDRESSES
DSP56309UM/D
Programming Reference
D-3