Various Plc Device Functions - Delta MS300 Series User Manual

CALL NOW 800-985-6929
Chapter 16 PLC Function ApplicationsMS300

16-5 Various PLC device functions

Item
Algorithmic control
method
Input/output
control method
Algorithmic
processing speed
Programming
language
Program capacity 2000 steps
Input/output
terminal
Type Device
X
Y
M
T
C
T
C
D
K
Constant
H
Serial communications port (program
High-speed counting
Function expansion module
Communication Expansion
Module
CALL NOW 800-985-6929
http://www.deltaacdrives.com
Specifications
Program stored internally, alternating back-and-forth
scanning method
When it starts again after ending (after execution to
the END command), the input/output has an immediate
refresh command
Basic commands (several us);
Command + ladder diagram
Input (X): 10, output (Y): 4
Item
External input relay
External output relay
General Use
Auxiliary
Special
Relay
purpose
Timer 100ms timer
16-bit counter,
Counter
general use
Current timer value
Current counter value
Used to
maintain
power Off
Data
Register
Special
purpose
Single-byte
Decimal
Double-byte Setting Range: K-2,147,483,648~K2,147,483,647
Single-byte
Hexadecimal
Double-byte Setting Range: H00000000 ~ HFFFFFFFF
write/read)
Input/output
Optional
Accessories
Optional
Accessories
http://www.deltaacdrives.com
Range
X0~X17, 16 points, octal
number
Y0~Y17, 16 points, octal
number
M0~M799, 800 points
M1000~M1279, 280
points
T0~T79, 80 points
C0~C39, 40 points
T0~T79, 80 points
C0~C39, 16-bit counter 40 points
D0~D9, 10 points
D10~D199, 190 points
D1000~D1219, 220
points
Setting Range: K-32,768 ~ K32,767
Setting Range:H0000 ~ HFFFF
RS-485/keypad port
Built-in three analog inputs and two analog outputs
Built-in a (MI7) 32-bit high-speed counter
--
EMC-COP01,(CANopen)
16-24
Email: info@deltaacdrives.com
Notes
Applications command (1-several
tens of us)
This number of contacts
constitutes MS300 input/output
contacts; other devices have
different correspondences
Function
Corresponds to external
Total
input point
32
Corresponds to external
points
output point
Total
Contact can switch On/Off
1080
within the program
points
Timers referred to by the
Total TMR command; contact of
80 the T with the same
points number will go On when
the time is reached
Counter referred to by the
Total CNT command; contact of
40 the C with the same
points number will go On when
the count is reached
The contact will be On
when the time is reached
The counter contact will
come On when the count is
reached
Total
Used as data storage
420
memory area
points
Email: info@deltaacdrives.com