Delta MS300 Series User Manual page 224

CALL NOW 800-985-6929



CALL NOW 800-985-6929
http://www.deltaacdrives.com
Multi-function Output 1 (Relay1)
Multi-function Output 2 (MO1)
Multi-function Output 3 (MO2)
Settings 0: No function
1: Operation indication
2: Operation speed attained
3: Desired frequency attained 1 (Pr. 02-22)
4: Desired frequency attained 2 (Pr. 02-24)
5: Zero speed (Frequency command)
6: Zero speed, include STOP (Frequency command)
7: Over torque 1 (Pr. 06-06~06-08)
8: Over torque 2 (Pr. 06-09~06-11)
9: Drive is ready
10: Low voltage warning (LV) (Pr. 06-00)
11: Malfunction indication
13: Overheat warning (Pr. 06-15)
14: Software brake signal indication (Pr. 07-00)
15: PID feedback error
16: Slip error (oSL)
17: Count value attained (Pr. 02-20; not return to 0)
18: Count value attained (Pr. 02-19; returns to 0)
19: External interrupt B.B. input
20: Warning output
21: Over voltage warning
22: Over-current stall prevention warning
23: Over-voltage stall prevention warning
24: Operation source
25: Forward command
26: Reverse command
29: Output when frequency
30: Output when frequency
31: Y-connection for the motor coil
32: -connection for the motor coil
△
33: Zero speed (actual output frequency)
34: Zero speed include stop (actual output frequency)
35: Error output selection 1 (Pr. 06-23)
36: Error output selection 2 (Pr. 06-24)
37: Error output selection 3 (Pr. 06-25)
38: Error output selection 4 (Pr. 06-26)
http://www.deltaacdrives.com
Chapter 12 Description of Parameter SettingsMS300
Base Block)
(
Pr.02-34 (
≧
Pr.02-34 (
<
12.1-02-11
Email: info@deltaacdrives.com
Factory Setting: 11
Factory Setting: 0
02-34)
≧
02-34)
<
Email: info@deltaacdrives.com