CALL NOW 800-985-6929
Chapter 12 Description of Parameter SettingsMS300
11 Advanced Parameters
In this parameter group, ASR is the abbreviation for Adjust Speed Regulator.
bit 7 = 0: frequency is saved before power turns off. When power turns ON again, the displayed
frequency will be the memorized frequency.
bit 7 = 1: frequency is not saved before power turns off. When power turns ON again, the
displayed frequency will be 0.00 Hz.
When setting is 2-phase mode, it can reduce the drive power components losses effectively and
provide better performance in the long wire applications.
When setting is space vector mode, it can reduce the power loss and electromagnetic noise of
motor effectively.
bit No.
0
Reserved
1
FWD / REV action control
2~15
Reserved
CALL NOW 800-985-6929
http://www.deltaacdrives.com
System Control
Settings
bit 3: Dead time compensation closed
bit 7: Selection to save or not save the frequency
ASR 1 Gain
Settings
0~40 Hz (IM) / 1~100 Hz (PM)
ASR 1 Integral Time
Settings
0.000~10.000 sec.
PWM Mode Selection
Settings
0: 2-phase
2: Space vector
System Control Flag
Settings
0000~FFFFh
Function
http://www.deltaacdrives.com
This parameter can be set during operation.
0: FWD / REV cannot be controlled by Pr. 02-12 bit 0 & 1
1: FWD / REV can be controlled by Pr. 02-12 bit 0 & 1
12.1-11-1
Email: info@deltaacdrives.com
Factory Setting: 0
Factory Setting: 10
Factory Setting: 0.100
Factory Settings: 2
Factory Settings: 0000
Description
Email: info@deltaacdrives.com