Display The Status Of Multi-Function Input Terminal; Status Of Multi-Function Output Terminal - Delta MS300 Series User Manual

CALL NOW 800-985-6929
 This parameter is used to set the level of motor at zero-speed. When the actual speed is lower
than this setting, the corresponding multi-function output terminal which is set to 43 will be ON,
as shown below:
 For Example:
If Pr. 02-50 displays 0034h (Hex), i.e. the value is 52 (decimal), and 110100 (binary). It means
MI3, MI5 and MI6 are ON.
Weights
Bit
 For Example:
When Pr. 02-51 displays 000Bh (hex), i.e. the value is 11 (decimal), and switched to 1011 (binary)
which means RY. MO1 is at ON status.
Weights
Bit
0=ON
1=OFF
CALL NOW 800-985-6929
http://www.deltaacdrives.com
a ctua l mo tor
sp ee d
0 2- 47
MO =d 43

Display the Status of Multi-function Input Terminal

Settings Monitor the status of multi-function input terminals
Weights
Weights
Bit
0=ON
1=OFF

Status of Multi-function Output Terminal

Settings Monitor the status of multi-function output terminals
http://www.deltaacdrives.com
Chapter 12 Description of Parameter SettingsMS300
Settings
Relay
Reserved
Reserved
NOTE
MO1
MO2
12.1-02-19
Email: info@deltaacdrives.com
Ti me
Factory Setting: Read only
NOTE
Factory Setting: Read
only
Email: info@deltaacdrives.com