CALL NOW 800-985-6929
Chapter 12 Description of Parameter SettingsMS300
It is used to set rated power of permanent magnet synchronous motor. Factory setting is the
power value of drive.
Set this parameter according to nameplate of motor. The factory setting is 90 % of rated current.
Example: The rated current of 7.5 HP (5.5 kW) is 25 A, the factory setting is 22.5 A.
It is used to set rated power of motor 3. Factory setting is the power value of drive.
CALL NOW 800-985-6929
http://www.deltaacdrives.com
Rated Power of Permanent Magnet Synchronous Motor
Settings
0.00~655.35 kW
Rated speed of Permanent Magnet Synchronous Motor
Settings
0~65535 rpm
Pole number of Permanent Magnet Synchronous Motor
Settings
0~65535
Stator Resistance of Permanent Magnet Synchronous Motor
0.000~65.535
Settings
Permanent Magnet Synchronous Motor Ld
Settings
0.00~655.35 mH
Permanent Magnet Synchronous Motor Lq
Settings
0.00~655.35 mH
Ke parameter of Permanent Magnet Synchronous Motor
Settings
0~65535
Full-load Current of Induction Motor 3 (A)
Settings
10~120 % of drive's rated current
The setting range will be 2.5~30 A. (25 × 10 % = 2.5 A and 25 × 120 % = 30 A)
Rated Power of Induction Motor 3 (kW)
Settings
0~655.35 kW
http://www.deltaacdrives.com
12.1-05-6
Email: info@deltaacdrives.com
Factory Setting: #.#
Factory Setting: 2000
Factory Setting: 10
Factory Setting: 0.000
Factory Setting: 0.00
Factory Setting: 0.00
Unit: V / 1000 rpm
Factory Setting: 0
Unit: Ampere
Factory Setting: #.##
Factory Setting: #.##
Email: info@deltaacdrives.com