Delta MS300 Series User Manual page 256

CALL NOW 800-985-6929
04 Multi-stage Speed Parameters















 The multi-function input terminals (refer to setting 1~4 of Pr. 02-01~02-07 Multi-function input
command) are used to select multi-stage speed command (max. is 15
multi-stage speed (frequency) is set by Pr. 04-00 to 04-14 as shown in the following diagram
 The run / stop command can be controlled by the external terminal / digital keypad /
communication via Pr. 00-21.
 Each multi-stage speed can be set within 0.00~599.00 Hz during operation.
 Explanation for the timing diagram of multi-stage speed and external terminals
The related parameter settings are:
1. Pr. 04-00~04-14: setting 1
2. Pr. 02-01~02-07: setting multi-function input terminals (multi-stage speed command 1~4)
 Related parameters:

01-22 JOG frequency setting

02-01 multi-function input command 1 (MI1)

02-02 multi-function input command 2 (MI2)

02-03 multi-function input command 3 (MI3)

02-04 multi-function input command 4 (MI4)
CALL NOW 800-985-6929
http://www.deltaacdrives.com
st
1 Stage Speed Frequency
nd
2 Stage Speed Frequency
rd
3 Stage Speed Frequency
th
4 Stage Speed Frequency
th
5 Stage Speed Frequency
th
6 Stage Speed Frequency
th
7 Stage Speed Frequency
th
8 Stage Speed Frequency
th
9 Stage Speed Frequency
th
10 Stage Speed Frequency
th
11 Stage Speed Frequency
th
12 Stage Speed Frequency
th
13 Stage Speed Frequency
th
14 Stage Speed Frequency
th
15 Stage Speed Frequency
Settings 0.00~599.00 Hz
st
~15
http://www.deltaacdrives.com
Chapter 12 Description of Parameter SettingsMS300
 This parameter can be set during operation.
th
multi-stage speed (to set the frequency of each stage speed)
12.1-04-1
Email: info@deltaacdrives.com
Factory Setting: 0.00
th
stage speed). The
.
Email: info@deltaacdrives.com