Cmm-Dn01 Devicenet Option Card - Delta MS300 Series User Manual

CALL NOW 800-985-6929
Chapter 8 Optional Cards MS300

8-4 CMM-DN01 DeviceNet option card


Functions
1. Based on the high-speed communication interface of Delta's HSSP
protocol, the AC motor drive can be controlled in real-time.
2. Supports Group 2 only connection and polling I/O data exchange.
3. For I/O mapping, supports max. 32 words input and 32 words
output.
4. Supports EDS file configuration in DeviceNet configuration
software.
5. Supports all Baud rates on DeviceNet bus: 125 kbps, 250 kbps, 500
kbps and extendable Baud rate mode.
6. Node address and Baud rate can be set up in the AC motor drive.
7. Power supplied from AC motor drive.

Product Profile
1. Screw fixing hole
2. Positioning hole
3. AC motor drive
connection port
4. Communication Port
5. Indicator
6. Ground terminal block

Specifications
DeviceNet Connector
Interface
Transmission method
Transmission cable
Transmission speed
Network protocol
AC Motor Drive Connection Port
Interface
Transmission method
Terminal function
Communication protocol
Electrical Specification
Power supply voltage
Insulation voltage
Communication wire
power consumption
Power consumption
CALL NOW 800-985-6929
http://www.deltaacdrives.com
5-PIN open pluggable connector. PIN interval: 5.08 mm
CAN
Shielded twisted pair cable (with 2 power cables)
125 kbps, 250 kbps, 500 kbps and extendable baud rate mode
DeviceNet protocol
50 PIN communication terminal
SPI communication
1. Communication module communicates with AC motor drive via this port.
2. AC motor drive provides power supply to communication module via this
port.
Delta HSSP protocol
5 VDC (supplied by AC motor drive)
500 VDC
0.85 W
1 W
8-12
http://www.deltaacdrives.com
Email: info@deltaacdrives.com
Wire: 24~20 AWG
Torque: 2 kg-cm / [1.7 Ib-in.] / [0.2 Nm]
Email: info@deltaacdrives.com