Turn On; Connect To Pc - Delta MS300 Series User Manual

CALL NOW 800-985-6929

16-3 Turn on

16-3-1
Start operation of PLC functions in accordance with the following four steps
After pressing the Menu key and selecting 4: PLC on the KPC-CC01 digital keypad (optional), press
the Enter key (see figure below).
1. Wiring: Connect the drive's RJ-45 communications interface to a PC via the RS485
2. PLC function usage
PLC
Digital keypad (KPMS-LE01)
CALL NOW 800-985-6929
http://www.deltaacdrives.com

Connect to PC

1.Disable
2.PLC Run
3.PLC Stop
http://www.deltaacdrives.com
Chapter 16 PLC Function ApplicationsMS300
PLC functions are as shown in the figure on the left; select
item 2 and implement PLC functions.
1: No function (Disable)
2: Enable PLC (PLC Run)
3: Stop PLC functions (PLC Stop)
PLC 0: Do not implement PLC functions
PLC 1: Initiate PLC Run
PLC 2: Initiate PLC Stop
16-5
Email: info@deltaacdrives.com
PLC
1.Disable
2.PLC Run
3.PLC Stop
2
Email: info@deltaacdrives.com