Reset Communication Card; Additional Setting For Communication Card; Status Of Communication Card - Delta MS300 Series User Manual

CALL NOW 800-985-6929








CALL NOW 800-985-6929
http://www.deltaacdrives.com
Getway Address 1 of the Communication Card
Getway Address 2 of the Communication Card
Getway Address 3 of the Communication Card
Getway Address 4 of the Communication Card
Settings 0~255
Password for Communication Card (Low word)
Password for Communication Card (High word)
Settings 0~99

Reset Communication Card

Settings 0: Disable
1: Reset, return to factory setting

Additional Setting for Communication Card

Settings bit 0: Enable IP filter
bit 1: Internet parameters enable (1 bit)
When IP address is set up, this bit will be enabled. After updating the
parameters of communication card, this bit will change to disable.
bit 2: Login password enable (1 bit)
When enter login password, this bit will be enabled. After updating the
parameters of communication card, this bit will change to disable.

Status of Communication Card

Settings bit 0: Password enable
When the communication card is set with password, this bit is enabled.
When the password is clear, this bit will be disabled.
http://www.deltaacdrives.com
Chapter 12 Description of Parameter SettingsMS300
12.1-09-16
Email: info@deltaacdrives.com
Factory Setting: 0
Factory Setting: 0
Factory Setting: 0
Factory Setting: 0
Factory Setting: 0
Email: info@deltaacdrives.com