Environment; Connector Pin Assignment - Delta MS300 Series User Manual

CALL NOW 800-985-6929

Environment

Noise immunity
Operation / Storage
Shock / Vibration resistance


Connector pin assignment

PIN
1
2
3
4
5
6
7
8
9

LED Indicator & Troubleshooting
There are 2 LED indicators on CMM-PD01：POWER LED and NET LED. POWER LED displays the
status of the working power. NET LED displays the connection status of the communication.
POWER LED
LED status
Green light on
Off
NET LED
LED status
Green light on
Red light on
Red light
flashes
Orange light
flashes
CALL NOW 800-985-6929
http://www.deltaacdrives.com
ESD (IEC 61800-5-1, IEC 6100-4-2)
EFT (IEC 61800-5-1, IEC 6100-4-4)
Surge Test (IEC 61800-5-1, IEC 6100-4-5)
Conducted Susceptibility Test (IEC 61800-5-1, IEC 6100-4-6)
Operation: -10ºC ~ 50ºC (temperature), 90% (humidity)
Storage: -25ºC ~ 70ºC (temperature), 95% (humidity)
International standards:
IEC 61131-2, IEC 68-2-6 (TEST Fc) / IEC 61131-2 & IEC 68-2-27(TEST Ea)
PIN name
-
-
Rxd / Txd-P Sending / receiving data P(B)
-
DGND Data reference ground
VP Power voltage – positive
-
Rxd / Txd-N Sending / receiving data N(A)
-
Indication
Power supply in normal status.
No power
Indication
Normal status
CMM-PD01 is not connected to
PROFIBUS DP bus.
Invalid PROFIBUS communication
address
CMM-PD01 fails to communicate
with AC motor drive.
http://www.deltaacdrives.com
Chapter 8 Optional Cards MS300
Definition
Not defined
Not defined
Not defined
Not defined
Not defined
No action is required
Check if the connection between CMM-PD01 and
AC motor drive is normal.
No action is required
Connect CMM-PD01 to PROFIBUS DP bus.
Set the PROFIBUS address of CMM-PD01 between
1 ~ 125 (decimal)
Switch off the power and check whether CMM-PD01
is installed correctly and connected normally to the
AC motor drive.
8-11
Email: info@deltaacdrives.com
9
5
6 1
Processing Methods
Processing Methods
Email: info@deltaacdrives.com