CALL NOW 800-985-6929
Chapter 12 Description of Parameter SettingsMS300
When the fault occurs and force stopping, it will be recorded in this parameter.
During stop with low voltage Lv (LvS warning, no record). During operation with mid-low voltage
Lv (LvA, Lvd, Lvn error, with record).
When dEb function is valid and enabled, the drive will execute dEb and record fault code 62 to
Pr. 06-17 ~ Pr. 06-22 simultaneously.
These parameters can be used with multi-function output terminal (set to 35-38) for the specific
requirement. When the fault occurs, the corresponding terminals will be activated (binary value
needs to be converted to decimal value before filled in Pr. 06-23 ~ Pr. 06-26).
0: No fault record
1: Over-current during acceleration (ocA)
2: Over-current during deceleration (ocd)
3: Over-current during constant speed (ocn)
4: Ground fault (GFF)
6: Over-current at stop (ocS)
7: Over-voltage during acceleration (ovA)
8: Over-voltage during deceleration (ovd)
9: Over-voltage during constant speed (ovn)
10: Over-voltage at stop (ovS)
CALL NOW 800-985-6929
http://www.deltaacdrives.com
121: Internal communication error (CP20)
123: Internal communication error (CP22)
124: Internal communication error (CP30)
126: Internal communication error (CP32)
127: Software version error (CP33)
128: Over-torque 3 (ot3)
129: Over-torque 4 (ot4)
134: Electronics thermal relay 3 protection (EoL3)
135: Electronics thermal relay 4 protection (EoL4)
140: GFF detected when power on (Hd6)
141: GFF occurs before run (b4GFF)
142: Auto tuning error 1 (DC test stage) (AUE1)
143: Auto tuning error 2 (High frequency test stage) (AUE2)
144: Auto tuning error 3 (Rotary test stage) (AUE3)
Fault Output Option 1
Fault Output Option 2
Fault Output Option 3
Fault Output Option 4
Settings
0~65535 (refer to bit table for fault code)
Fault Code
http://www.deltaacdrives.com
bit 0
bit 1
bit 2
current
Volt.
OL
●
●
●
●
●
●
●
●
●
12.1-06-10
Email: info@deltaacdrives.com
Factory Setting: 0
bit 3
bit 4
bit 5
bit 6
SYS
FBK
EXI
CE
Email: info@deltaacdrives.com