Delta MS300 Series User Manual page 173

CALL NOW 800-985-6929
Chapter 11 Summary of Parameter SettingsMS300
Pr.
08-20 PID mode selection
Enable PID to change
08-21
operation direction
08-22 Wakeup delay time

08-23 PID control flag

PID output command limit
08-26

(reverse limit)
Acceleration / deceleration
08-27

time of PID command
Selection of frequency base
08-29 corresponding to 100.00 %
PID
CALL NOW 800-985-6929
http://www.deltaacdrives.com
Explanation
0: Serial connection
1: Parallel connection
0: Operation direction can be changed
1: Operation direction can not be changed
0.00~600.00 sec.
bit 0 = 1, PID reverse running must follow the setting of
bit 0 = 0, PID reverse running refers to PID's calculated
bit 1 = 1, PID Kp gain is 2 decimal place
bit 1 = 0, PID Kp gain is 1 decimal place
0.0~110.0 %
0.00~655.35 sec.
0: PID control output 100.00 % corresponding to max.
output frequency (Pr. 01-00)
1: PID control output 100.00 % corresponding to the
input value of auxiliary frequency
http://www.deltaacdrives.com
Settings
Pr. 00-23.
value.
11-36
Email: info@deltaacdrives.com
Factory
Setting
0
0
0.00
2
100.0
0.00
0
Email: info@deltaacdrives.com