Front Crankcase Cover Removal - Honda MUV700 big red Service Manual

Install the valve body cover with the three bolts and
washers, and lighten bolts.
Install the wire clip into the body cover.
Check the transmission oil pressure if necessary
(page 14·8) .
Install the following:
- leh side panel (page 3-11)
- driver seat under cover (page 3-6)
FRONT CRANKCASE COVER
REMOVAL
Remove the following :
- exhaust system (page 3-25)
- oil cooler (page 5-1 3)
- water pump (page
7-9)
- front propeller shaft (page 19-12)
- shift valve body (page 14-28)
Loosen the pipe setting cap.
Remove the following:
fourteen bolts
- front crankcase cover
- two oil joint pipes and O-rings
- oil orifice and O-rings
- two dowel pins
- pipe setting cap and O-ring
- oil feed pipe C
DRIVETRAIN SYSTEM
CONNECTORS
14-37