Honda MUV700 big red Service Manual page 138

LUBRICATION SYSTEM
5-10
Apply locking agent to the sprocket bolt threads.
Install the driven sprocket onto the pump shaft,
aligning the flats. Install the sprocket bolt and
tighten it.
TORQUE: 12 N'm (1 .2 kgf·m , 9Ibf·tt)
Coat a new O-ring with engine oil and install it into
the relief valve groove.
Install the relief valve into the pump body B.
Install the oil pump body B onto the pump body A.
Insert the drive pin into the pump shaft.
Install the inner rotor onto the pump shaft, aligning
its grooves with the drive pin.
Install the outer rotor into oil pump body C.
Install the pump body C onto the pump body B.
RELIEF VALVE
SODye
INNER ROlrOR
DurER AOTOR