Honda MUV700 big red Service Manual page 355

Install the needle bearing into the inner collar.
Install the inner collar onto the crankshaft by align-
ing the cutout with the stopper pin.
Install the thrust needle bearing onto the inner col-
lar with the needle roller side facing in.
Install the washers.
Install the two needle bearings into the stator shaft
from both sides.
Install the needle bearing onto the stator shaft.
Install the stator shaft onto the crankshaft and t he
inner collar while turning it counterclockwise.
Install the torque converter by aligning the splines
carefully, and engaging the primary drive and
d r iven gear teeth.
Install the washer.
DRIVETRAIN SYSTEM
NEEDLE BEARINGS
14-45