Honda MUV700 big red Service Manual page 449

Release the boot rib from the pin groove and
remove each slide pins. Remove the boots from the
ca liper bracket.
Remove the pad retainers and the pad spring.
Remove the caliper piston by turning it counter-
clockwise, using the special tool or equivalent.
TOOL:
Lock nut wrench 07716·0020100
Remove the piston boot.
Be careful not to
Push the piston seal in and lift
it
out.
damage the piston
sliding surface.
Remove the snap ring using the special tooL
TOOL:
Snap ring pliers
07914-SA50001
BRAKE SYSTEM
BOOTS
SPRING
PIN B
RETAINERS
18-21