Cylinder Head Removal - Honda MUV700 big red Service Manual

Measure each follower bore 1 .0 .
SERVICE UMIT: 22.54 mm (0.887 in )
Subtract each follower 0 .0 . from the corresponding
bore 1.0. to obtain the follower-to·bore clearance.
SERVICE UMIT: 0.07 mm (0.003 in)
CYLINDER HEAD REMOVAL
Remove the following:
- cylinder head cover (page 9-6)
- thermostat (page 7·7)
Disconnect the ECT sensor 2P (black) connector.
Remove the following:
- ECT sensor and O-ring
- bypass hose (from the cylinder head )
Do nor
strike the -
spark plug
cylInder head
too - five bolts
hard and do not -
cylinder head
damage the matmg
surface WIth
a
screwdriver.
CYLINDER HEADIVALVE/CAMSHAFT
9-9