Iacv Inspection; Iacv Removal - Honda MUV700 big red Service Manual

FUEL SYSTEM (PGM -FI)
IACV
Connect the following :
- injector 2P gray connector
- IACV 4P black connector
- sensor unit 5P black connector
Connect the quick connect fitting to the fuel injector
(page 6-33).
Install the air clea ner housing (page 6-41).
INSPECTION
NOTE:
• The IACV is installed on the throttle body and is
operated by the step motor. When the ignition
switch is turned ON
(I),
the IACV operates for a
few seconds.
Remove the center frame cover (page 3-
n
TheJACVoperaflOfl
Turn the ignition switch to ON
(I)
and check the
can
be chedr.ed
IACV.
visually by
If the step motor operating (beep) sound is heard,
remOVIng fila IACV
the IACV is normal.
wah /he connector
connected
6-48
REMOVAL
Remove the center frame cover (page 3-7) ,
Clean the throttle body to prevent dirt and debris
from entering the IACV passage.
Disconnect the IACV 4P black connector.
Remove the two torx screws, retainer plate and
IACV.