Honda MUV700 big red Service Manual page 528

REAR DRIVING MECHANISM
Replace the pinion shim with a th icker one if the
contact pattern is too high. toward the face.
TOO HIG H:
FACE FACE
Drive side
t
e:::>
~
I
Coast side
Replace the pinion shim with a thinner one
if
the
~ T~O~Oi'i:L~O~W~'===;:;~;;==========
contact pattern is too low, toward the flank.
The pattern will shift about 0.5 - '.0 mm (0.02 - 0.04
in) when the thickness of the shim is changed by
0,12 mm
(0.005
in).
NO TE:
• Eleven different thickness shims are available
from the thinnest (1.26 mm thickness: A) shim to
the thickest 11.B6 mm thickness: K) in intervals of
0.06 mm.
Pinion gear shims:
A: (thinnest): 1.26 mm (0.050 i n)
E: (standard) : 1.50 mm (0.060 in)
K: (thickest): 1.86 mm (0.073 in)
Pinion shim replacement (page 20-26)
DIFFERENTIAL INSPECTION
Rep/ace the
Turn the differential gears in the housing and check
differentia/assn tha t the gears turns smoothly and quietl y without
assembly
binding.
Check the each gear for wear or damage.
RING GEAR REMOVAL
Remove the ten bolts and ring gear.
20-24
Drive side
I
c:::::"
FLANK
~
I
Coast side
FLANK
RING GEAR