Crankcase Separation - Honda MUV700 big red Service Manual

CRANKCASE/CRANKSHAFT/BALANCER
CRANKCASE SEPARATION
Remove the following :
- engine ~page
8-2)
cylinder and piston (page 10-4)
sub-tra nsmission/gea rshift linkage (page 12-9)
flywhee l/starter clutch (page 11-10)
torque converter (page 14-42)
1st shift clutch (page 14·47)
oil pump (page 5-6)
cam chain
oil pump drive chain
pivot bolt
cam chain tensioner and collar
Tile crankcase bolts -
nine rear crankcase bolts
are loosened
In
a
Cflsscross pa lrem
In
several steps
Do not orr
the
crankcase apart
with
8
sClilwdrrver,
13-6
- five front crankcase bolts
Place the crankcase assembly with the rear crank-
case down.
Remove the front crankcase while tapping it at S9V-
erallocations with a soh hammer.
Remove the following:
- crankshaft bearing inner race
- two dowel pins
- oil joint collar and O-rings