Gear Selector Lever Linkage Disassembly - Honda MUV700 big red Service Manual

SUB-TRANSMISSION/GEARSHIFT LINKAGE
Apply engine oil to the gears and sliding surface
and install the following.
gear shaft
washer
idle gear (13T)
- idle gear (25T)
- washer
Install the rear crankcase cover (page 12-5).
GEAR SELECTOR LEVER LINKAGE
DISASSEMBLY
Remove the gear selector lever grip.
Loosen the cable nuts.
Remove the following:
- cotter pin and washer
- gear selector cable
- collar
Loosen the lever pivot nut.
Be careful nor to While holding the lever securely, remove the arm
damage the threads
pivot bolt (washer-bolt) and the selector lever
in the frame.
assembly.
Remove the following:
- pivot nut and boll
- selector lever
- spring
12-15